:
1. The 365 nm wavelength of UV radiation is one kind that is often utilized for curing. This specific wavelength is well-known for having a high energy and for starting the curing process quickly. It is a well-liked option in many sectors because of its ability to cure even thick layers of industrial coatings and adhesives.
2. 365 nm curing light has many advantages, such as consistency, efficiency, and ease of use. Businesses might use UV light curing since it is usually considerably quicker than other curing techniques. Furthermore, the wavelength of 365 nm consistently starts the curing process in a range of adhesives and coatings. Lastly, because all that's needed to start the curing process is a UV light, it's a rather easy and convenient procedure.
:
| 10w 20w 40w | |
| 30cm 60cm 120cm | |
| 85-265V AC,100-347 AC,12V DC, 24V DC, 48V DC | |
| 180 degree | |
| 365nm 395nm | |
| IP44 | |
| Aluminum Body+ PC cover | |
| SMD 2835, Epistar , Samsung | |
| 50000hours | |
UV radiation One kind of LED light that produces a 365nm wavelength is called a 365nm curing light. Materials like UV glue, resin, and other UV-sensitive materials cure very rapidly with its help. The substance is exposed to strong UV radiation during the curing process, which starts a chemical reaction that solidifies the material. With its ability to swiftly start the chemical reaction, the 365 nm wavelength is ideal for this procedure. A robust and long-lasting bond that is resistant to severe strain and stress is the end product of the curing process.
1. Electronics industry: Adhesives and coatings on circuit boards and other electronic components are cured using UV light at 365 nanometers. Employee effort is lessened and manufacturing may proceed more quickly because of the short drying period.
2. Dental sector: Composite materials used in tooth restorations are cured in the dental industry using UV radiation at 365 nm. Because the cured material is less prone to bacterial development, the short curing period permits shorter treatment times and lowers the danger of contamination.
3. The automotive sector uses 365 nm UV curing light to cure the adhesives and coatings applied to automobiles. The high-quality automobiles may be produced quickly because of the short curing period.
4. 3D printing: Photopolymer resins used in stereolithography (SLA) are cured in the 3D printing industry using UV light at 365 nm. Layer by layer, the photopolymer is solidified using strong UV light to produce a three-dimensional sculpture.
